These machines have been professionally inspected and are problem-free. This adds more reliability and stability to the machine. In addition, refurbished machines are. Cheaper than brand new machines.Repaired by professionals using genuine parts. All refurbished machines go through an. These items may show small marks from previous use, such as scratches, but they do not affect their normal function.
We also offer pre-sales and post-sales support. Refurbished Creality Ender 3/Ender 3 Pro/Ender 5/Ender 5 Pro/CR-10 V2 3D Printer. One-piece structure, Super printing size 220220250mm. Safety protected Power supply, reach 110? For hotbed in about 5 minutes.
The resume printing function can resume prints even after a power outage or lapse occurs. Removable Build Plate to replace reprinting tape and glue, solve warping problem. V1.1.4 Standard Version motherboard comes with thermal runaway protection. The board is only the Standard Version, Not-Silent. Ender 3 Pro has been upgraded.With a Completely removable and flexible magnetic bed and Brand Meanwell power supply. Classic appearance in integrated all-metal body inherited from its predecessor Ender-3, firm and stable. Integrated structure design, with integrated structure and modular design, the power supply is concealed in the machine, making it much safer. Molding Tech: FDM 3d printer. Print speed: 30-60mm/s (recommended), =180mm/s. Layer thickness: 0.1-0.4mm. Nominal voltage: 100V-240V AC50/60HZ DC24V.
The "Sprite" is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments. CR Touch Automatic Bed Leveling? 16-point automatic bed leveling technology saves you the trouble of manual leveling and makes leveling simple and easy. With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
PC Spring Steel Printing Platform? The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, the model can be sticked to the platform or take off more easier. Power Loss Recovery and Filament Sensor? Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing. 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy. CR Touch Automatic Bed Leveling.
PC Spring Steel Printing Platform. Power Loss Recovery and Filament Sensor.
Machine Net Weight : 9.1kg. Type of Extruder: "Sprite" Direct Extruder. Printing Speed: 150mm/s at the maximum.
Extruder Gear ratio: 1:03.5. Automatic Bed Leveling: CR Touch.Printing Layer Thickness :0.05-0.35mm. Package Gross Weight:11.2kg. Rated Voltage : 115/230v 50/60Hz 4.5/2.5A. Printing Platform:PC spring steel sheet. Printing Method :Type-C USB/SD card. Faster assembly, Only 5 steps to install. Running quieter and smoothly because of the double Y-axis. Higher precision and accuracy because of the hotbed fixed on Z-axis. Faster printing up to 185mm/s.
36s Faster heating the hotbed up to 50? Higher hotbed heating temp than Ender 3, up to 130? Long time printing, print 100 hours without error Power Suppl y. With Silent Motherboard & Metal Extruder Frame & Capricorn Bowden Teflon tube.
Creality New cubic Ender-6 3d printer with higher precision and quick printing speed(3X Speed) in Core -XY Structure. In terms of size, the Ender-6's 3d printer build volume of 250 x 250 x 400 mm puts it right between an Ender-5 Pro (220 x 220 x 300 mm) and the CR-10 series, which starts at 300 x 300 x 400 mm.This should suffice for the majority of your daily print jobs. Elegant Appearance: Ender-6 with a new look integrated all-metal chamber body matched with a transparent acrylic open door and blue corner. Enclosed Performance but Not TOP LID; Ultra Silent Printing: Ender-6 is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise. TMC-2208 motherboard always ensures smooth movement in silence; Large Printing Size: 250250400mm; Stable Core -XY Structure: Ender-6 is easier to make the printing more stable and more precise with core-XY mechanical structure and quality print nozzle; 3X Printing Speed: Works quite well to achieve print speed up to 150mm/s, delivering the results faster.
Equipped with the rolling conveyor belt, it realizes continuous printing. No worries to print the infinite length model. High productivity, time-saving, and cost-efficient. A removable extension bracket is available for installing to prevent the model from falling during printing.
A high-quality dual-gear metal extruder, combined with the 45-degree slanting nozzle turns more than 200 hours of continuous printing into reality. The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing experience. Made of a wear-resistant material, the conveyor belt features excellent adhesion to the model. The printed model can fall off automatically as the belt rolls to the end, thus free your hand.
Easy to replace the conveyor-belt. Exclusive Slice Software for 3DPrintMill Only.
This slicing software CrealityBelt is specially designed for 3DPrintMill. CrealityBelt is truly user-friendly ascribing to its simple operation. Whenever there is a possible accident like filament run-out or filament breakage, the smart sensor forces the machine to suspend printing.Printing will be automatically resumed after the new filament feed-in. Intelligent power protection device, resume printing, and no fear of power failure.
Print dimension: 200 170 8 mm. Machine dimension: 535 656 410mm. Package dimension: 685 565 302mm.
Print accuracy: ± 0.1mm. Layer thickness: 0.1mm-0.4mm. Power supply: AC 100-120v / 200-240v, DC 24V.
Supported filaments: PLA / TPU / PETG. Diameter of filament: 1.75mm. Printing Materials: 1.75mm PLA.
Layer thickness: 0.05-0.4mm (adjustable). Nozzle temp: Max 250 degree.Hotbed temperature: PLA: Max 50 degree. Continuous working time lasts up to 200 hours. Printing Method: TF card(off-line), contact to the PC(online). Operating System: Linux, Windows, OSX. Operating Software: CURA, Repetier-Host simplify 3D. Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc. Box Design with Overhead Gantry. Meet more of your printing requirements.
Your idea should not be confined. Achieve better print results and a larger print model at a time. With BL Touch as configured.
You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for the Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provide reliable operation with all build surfaces. Stable Z-axis Lead screw drive smoothly and steady. The movement of the build plate will be more stable. BL-TOUCH Included: Matrix Automatic Leveling, quality Bill Touch automatic leveling device.
And the CR-10 Pro V2 will automatically measure the height of 9 unique points on the heated bed to determine the ideal settings for perfect prints every time. SENSITIVE SENSOR Real-Time Detection, CR-10S Pro V2 has a newly-added innovative material shortage detection switch, Even also highly sensitive to detect transparent materials.STABLE AND HIGH PRECISION MOTHERBOARD CR-10S Pro V2 adopts V2.4.1 motherboard independently developed stable performance TMC ultra-quiet drive 256 subdivision for finer printing. DIGITAL HD TOUCH SCREEN HD touch screen and large viewing angles, printing status, functions and parameter setting are clearly displayed, New Friendly UI, easy to use and learn. TEFLON TUBE AND BONDTECH GEAR EXTRUSION Imported high temperature resistant blue Teflon tube ensure great printing texture, Bondtech Gear extrusion Structure has two high-density gear and big extrusion force for smooth feeding. Matrix BL Touch automatic leveling. V2.4.1 Ultra-Quiet motherboard.
Imported authorized Capricorn Teflon tube. Brand Mean Well power supply 500W. Built-in WIFI function: Remote control printing anytime, anywhere.
Low Power Mode: Safe and worry-free save energy and power. Intelligent Auto-leveling: Instant printing after initial auto-leveling. Dual Z Axes+Dual Diagonal Drawbars: Ensure stable and precise printing.
4.3-inch Full-view Touch Screen: Intuitive and easy-to-use. Super Car Design: A combination design of aesthetics and technology. Ultra-silent Design: Mute mainboard/Mute fan Low-noise power supply. Modular Structure: 6-steps to assemble 8 minutes to complete. CR-10 Smart 3d printer supports both WIFI & RJ45 wired network connection.Self-developed 32-bit patented mute mainboard, low-noise power supply, and highly efficient cooling fans ensure a silent 3D printing experience. With the V2.0 auto-leveling system, you can enjoy a hassle-free leveling process and instant printing after the initial auto-leveling is completed.
The screen will dim if there's no manual operation in 30 mins to save power. And it's environmentally friendly. CR-10 Smart supports auto feeding and retreating filament which makes the process easier. The machine will auto shut down after the model is completed to save power and effort.
Package Gross Weight: 17.3KG. Only 5 mins with 5 modular parts and 8 screws, you can start your first 3D print, simple assembly but more more elaborately.Win-win in fun and performance. Modularized Nozzle kit, equipped with high-efficiency heating device and powerful cooling. Saving more time and effort in nozzle maintenance. Equipped with dual Z-axes and timing belt, the CR-6 SE are more stable during printing and it can delivering finer results. If the filament run out or broken, the sensor automatically will stops the machine from printing to protect the host. The branded power can provide 24V output, and can adapt to the 100V-240V voltage environment to improve the stability. More silence then usual, We chooses Trinamic Controller which can make the printing results have high-performance. You can carry it everywhere you want because of the handle , the CR-6 SE is 9.5kg light weighted machine.
With a handle added, you can easy to carry it. We take user experience seriously, so we redesign the hotbed fixator and Wider Y-axis profile. More importantly we built-in tool box for your tiny components. Even the beginner of 3D print can get good works.Meanwell 24V/350W Power Supply: CR6 SE equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer and neater.
Silent Motherboard with Trinamic Driver: A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given.
Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10. Easy Assemble: In comparison to an Ender 3, CR-6 SE comes almost assembled.
You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires. Nozzle Diameter:Standard 0.4mm(can be changed to 0.3/0.2/0.5 0.6 0.8 1.00 1.2mm). Printing Speed:Normal: 80mm/s, Max. Materials:1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.
Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc. Format : STL, OBJ, G-Code, JPG. Printing Method: SD card(off-line), contact to the PC(on-line). Dual Port Hot Port Cooling Fans.
Every heat-dissipated and cooling down immediately, reducing plugging and poor-spillage ensure models with high quality. The 3d printer equipped with genuine Titan Direct Drive, the torque of the stepper motor is lower. It's more precise to control the feed-in filament, great at printing the soft filament like TPU. Upgraded ultra-silent motherboard, this Creality 3d printer is more cost-effective and running more stable.
BL touch(Auto-Leveling Device)can be added by yourself, enjoying more fun of DIY your own Creality 3d printer. Recover from potential print failures before they happen.
This design in Creality 3d printer will save your filaments when a strike occurs. The Creality CR-10 V3 3D printer, solid 350W branded power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100? The PLA filaments and tool kit are not included. We currently have two refurbished warehouses in the US, one is in TX, another one is in NY.This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "sovol-official" and is located in this country: US. This item can be shipped to United States.