ThinkScan Plus Car 4 Sysetem Diagnostic Engine/SRS/ABS/Transmission OBD2 Scanner. Top Reasons To Choose Thinkscan Plus S5. ThinkCar ThinkScan Plus S5 OBD2 Diagnostic Scanner is suitable for car repair technicians, small and medium-sized repair shops and personal car owners who deeply love DIY vehicles. It support Read Codes/Erase Codes/Live Data/Version information for.
Full EOBD OBD2 Basic Function + Live Data? ThinkScan Plus S5 OBD2 Scanner Code Reader supports to do Full obd 2 function. Including Read/Clear codes, data stream, I/M readiness, O2 sensor, EVAP system, DTC look up and more... You can select data stream you need from "Long/Short Term Fuel Trim" "Vehicle Speed Sensor" "O2 Sensor Output Voltage" "Engine RPM" and etc. To show the live data stream.
Support More Than 120+ Car Models & Multiple Languages? ThinkScan Plus S5 diagnostic scanner cover all vehicles that support the OBD protocol after 1996, like For AUDI, For BENZ, For BMW, For CHRYSLER, For CITROEN, For DACIA, For DAEWOO, For FIAT, For GM, For HOLDEN, For HONDA, For HYUNDAI, For JAGUAR, For TOYOTA, For USAFORD, For VOLVO, For VW and etc. Support English, Spanish, Portuguese, French, Japanese, German, Italian and Russian.
Scan QR Code to Share & Print + Type-C Port. Unlike most OBDII products on the market, ThinkScan Plus S5 OBD2 Scanner support scan the QR code to share where you want and print it after obtaining the diagnostic report. You can also Connect Type-C to the computer via the datas cable to export any data you want; Convenient and fast, keeping up with the trend of the times. And you can also Semi-Auto VIN your vehicles at anytime, manual diagnosis is also available.
Plug and Play + Big Holder + 5'' TouchScreen? Memory: 1G, Storage Capacity: 16G, Battery: 600mAh/3.7V.
OBD2 Cable: Integrated Undetachable Design. No worry of cable missing. Plug in and play, easy to carry. Sensitive 5'' large screen with Android 7.0. You can display the interface you want with a flick of your finger, come and go freely.
ScreenShot + Screen Recorder + WIFI FREE Update? We also have two excellent advantages, that is, when you enable the screenshot and screen recording functions in the settings, you can start to. Take screenshots and screen recordings.
They will finally be saved in. "Photo album" and "Screen recorder". Besides, you can update softwares free lifetime. Thinksan Plus S5 Support 4 System Diagnosis. The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing. Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status. Thinkscan Plus S5 Add 28 Maintenance Service.
The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle. To reset the steering angle, first find the relative zero point position for the car to drive in straight line.
Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle. This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. Lf the ABS computer, ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires.
Lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started. The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off.After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC'gear not learned is present, gear learning must be performed. To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECu, BCM, or remote control battery is replaced, anti-theft key matching must be performed. Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity.
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection. After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.
Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, andtire is replaced for the car with tire pressure monitoring function. This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration. This feature is used to initialize the adaptive headlamp system.
According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture. This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality. This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced. A ODo reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.BUsually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance. This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicatorlights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable, it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and theairbag computer can continue to use. Ln order to reduce power consumption, the following functions may be disabled, including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal. This function is applied to set or learn Air/Fuel ratio parameters. This function is used to open or close the automatic start-stop function via setting the hidden function inECU(provided that the vehicle has a hidden function and supported by hardware). NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. Lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine ECu. AdBlue Reset (Diesel Engine Exhaust Gas Filter).
After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required. This function is applied to match the seats with memory function that are replaced and repaired.Use this function to activate the electronic water pump before venting the cooling system. This function is used to set the size parameters of the modified or replaced tire. This feature is designed to perform door window matching to recover ECU initial memory, and recover theautomatic ascending and descending function of power window. This function is used to change the system language of the vehicle central control panel.
Thinkscan Plus S5 Support 10 Full OBDII Functions. Show the detailed description of the Diagnostic Trouble Code (DTCs). Turns off Check Engine Light (MIL), clears codes and resets monitors. Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.Show the information of continuous data stream from a vehicle in live graphic (waveform) display. Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer. Retrieves and displays test results for emission-related powertrain components and systems.
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Certain vehicle components can be actuated by commands sent from the scanner to test their operability. Thinkscan Plus S5 More Features.The chart clearly shows and helps you quickly where the problem lies. You no longer have to manually enter the VIN code, automatically scan to quickly obtain vehicle information. Thinkscan Plus S5 Support Print & Share Diagnosis Report. Ask for Help by sending the report to your mechanic or friend Give to your clients as part of their repair documentation A Reference for vehicle inspection and maintenance. Thinkscan Plus S5 Support 8 Languages. English, Russian, Spanish, Portuguese, French, Japanese, German, Italian.
Note:There are eight languages in the manual. Thinkscan Plus S5 Support 5000+ Vehicle Models. DAEWOO, HONDA, HYUNDAI, INFINITI, KIA, MAZDA, MITSUBISHI, NISSAN, SUBARU, TOYOTA, ISUZU, DAIHATSU, FUTIAN, LIFAN, SSANGYONG, etc.CHRYSLER, GM, US-FORD, FIAT (BRAZIL), GM (BRAZIL), DODGE, JEEP, BUICK, CADILLAC, CHEVROLET, etc. ASTONMARTIN, AUDI, BENZ, BMW, FIAT, JAGUAR, LANDROVER, SAAB, SEAT, SKODA, SMART, VOLVO, OPEL, PEUGEOT, DACIA, CITROEN, MINI, PORSCHE, SPRINTER, VW, ALFA ROMEO, VAUXHALL, EU-FORD, FERRARI, IVECO, MASERATI, UAZ, VAZ, BENTLEY, BUGATTI, DR, etc. If you don't know whether this product will fit for your car, Please Leave us message in below format. (For example : BMW, 2005, 2.0cc, Diesel, I want to do Oil Reset Function).
We will check for you. Thinkscan Plus S5 Support Lifetime Free Update via WIFI. Thinkscan Plus S5 Support Online Feedback Function. If you encounter any problems in the diagnosis, you can provide feedback on the device, and our engineers will respond in time and help you. Thinkscan Plus S5 Product Details.
Thinkscan Plus S5 Package List. ThinkScan Plus S51 USB cable1 Card Reader1 Instruction manual1 Packing box1. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kind understanding would be highly appreciated!We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory. We will try our best to help you get your package. We are eager to be your professional parner of automobile diagnostic tool. We support remote assistance by teamviewer if you have any difficulty in software installation.
This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "maxisys" and is located in this country: US.
This item can be shipped to United States.