THINKCAR ThinkTool Pros Bidirectional Scanner Car Diagnostic Scanner Key Coding. Full System Diagnostic Scanner with 2 Years Free Update. 10-inch HD IPS Touch Screen+ Car full system Scanner +bluetooth/wifi +34 Special service+ADAS Calibration+ECU Coding+Active test+ Android 10 OS + 64GB Memory +Quad-Core 2.0GHz processor+ 2 Years free update online.2023 THINKCAR THINKTOOL PROS Professional Modular Diagnostic Tool CAR REPAIR SHOPS & MECHANICS's First Choice!! You Deserve to Have a THINKCAR THINKTOOL PROS. Powerful Quad-Core 2.0GHz processor with 4G+64G Hardware Configuration. OE-Level Wireless Intelligent Diagnostics, covering more than 100 car makes. Unique Modular Design, supporting up to 8 functional modules for any application scenarios. Android 10 OS running on 10-inch HD IPS Touch Screen. Supporting 34 Service Reset Functions, more to cover soon. The Advanced Functions of THINKCAR ThinkTool Pros Supports. Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW), lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting.
The function on the equipment is disabled by default, and the user needs to activate the function with an activation card before using it. And this function needs to be matched with THINKCAR ADAS calibration tools. Mainly used to calibrate various camera and radar of driver assistance systems. THINKTOOL Pros+/Pros can work with wireless tire pressure diagnostic tool (optional accessory) to achieve the features of TPMS activation, programming and learning. AActivation:to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status.
BProgramming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication. C Learning:to write the sensor ID into the vehicle ECU for sensor identification. THINKTOOL Pros/Pros+ supports matching, coding, programming of most vehicles' programable modules, and most commonly used maintenance and reset functions, namely, Oil Reset, Elec.
Throttle Adaption, IMMO Service, Injector Coding, Break-pad Reset, Steering Angle Reset, ABS Bleeding, AFS Reset, Battery Matching, A/T Learning, DPF Regeneration, EGR Adaption, TPMS Reset, Sunroof lnitialization, Suspension Matching, Gear Learning, Airbag Reset, ODO Reset, AdBlue Reset, A/F Reset, CoolantBleeding, Language Change, NOx Sensor Reset, Seat Calibration, Stop/Start Reset, Transport Mode, Tyre Reset, Windows Calibration. 12 Data Graphs shows in the Same Screen. It is better you can compare and Analysis the Data, easy to find the problem of the car! This function is used to test whether the exECUtion components in the electronic control system can work.
The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements. With HD Package, ThinkTOOL PROS Supports 12V cars and 24V trucks, but pls note HD package need pay additional.
Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics etc. (Great for car repair shops and mechanics to improve business). THINKCAR THINKTOOL PROS has 34+ service functions which allows you to reset various systems in your vehicle. Support more function than other scanners priced similarly. The lightening of the car maintenance light indicates that the vehicle needs maintenance.
Reset them ileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle. To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle. This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. Lf the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.
After replacing the brake pad, you must reset the brake pad. The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer to more accurately diagnose engine misfires. Lf gear learning is not performed for a car equipped with Delphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC'gear not learned is present, gear learning must be performed. To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery is replaced, anti-theft key matching must be performed. Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity.
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection. After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL. Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, and tire is replaced for the car with tire pressure monitoring function.
This function can adjust the height of the body. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration. This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture. This function can complete the gearbox self-learning to improve gear shifting quality.
When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality. This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc. This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced. A ODo reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car.
Diagnostic computer and data cable, so that the odometer shows the actual mileage. BUsually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable, it is required that all new accessories must be replaced, but after performing this function, the data of the airbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the airbag computer can continue to use.
Ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.This function is applied to set or learn Air/Fuel ratio parameters. This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware). NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust.
Lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU. AdBlue Reset (Diesel Engine Exhaust Gas Filter). After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required. This function is applied to match the seats with memory function that are replaced and repaired. Use this function to activate the electronic water pump before venting the cooling system.
This function is used to set the size parameters of the modified or replaced tire. This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window. This function is used to change the system language of the vehicle central control panel. THINKCAR THINKTool PROS Supports Complete OBD2 functions. Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs).Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors. Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
The Other Function of THINKCAR THINKTool PROS. Auto VIN read Function :It can read VIN information automanually when you connect Car, fast get the inforamtion. Quick test :It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health.
Support system scan and system select. System Scan :automatically scan all systems of the vehicle. System Selection :manually choose the automotive electronic control system. It adopts smart detection mode.After the vehicle is connected, the system will automatically recognize. The vehicle information, automatically check the vehicle, and automatically generates a report.
Printing can be set so that no human intervention is needed throughout the process. Combine: Displayed in graph merge status for data comparison. Value: Displayed the parameters in values and shown in list format. Customize: Customize the data stream option to be viewed.Tap the button, a pull-down list of the data stream items appears on the screen. Select the desired items (max12 items), and then screen will display the waveforms corresponding to these items immediately. If need to remove any items, just deselect them. Support Language: English, German, Spanish, French, Italian, Japanese, Portuguese, Russian, Chinese.
If you encounter an unresolved problem or diagnostic software bug during diagnosis, you can revert. The most recent 20 test records to Thinkcar Team. When we receive your feedback, we will analyze and troubleshoot it in a timely manner, to improve the quality of our products and user experience.
Thermal printer, work with the main unit, also can work with module dock. Quick print diagnostic reports anytime and anywhere. THINKCAR ThinkTool Pros Supports Car List. How To Register THINKCAR ThinkTool Pros. Step 1 :Setting language & Time Zone, Connect WIFI.
Step 2 :Agree the Register term. Step 4 :VCI Activate - Enter the serial number and Password to activate. How To Update THINKCAR ThinkTool Pros.
ThinkTOOL PRO is with2 years free Update. How To Printer the Diagnostic Report.Share the Diagnostic Report out via USB, then print. Camera:Rear camera 8.0MP.
Network:Wi-Fi, WL AN 802. THINKCAR ThinkTool Pros packing list. 1 Free Gift TPMS Reset Tool For GM vehicles.Otherwise a Unpaid Item case will be opened to you. USA, UK, HongKong, Australia, Russian, Germany. 12 months free repair for the devices. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. We are authorized first class distributor of Launch, Thinkcar, Ediag and Kingbolen brands. And more brands will be show in our store in near future.
Business time: GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "ediag_official" and is located in this country: US.
This item can be shipped to United States.