Vehicle Coverage : Works on all vehicles domestic & import since 1996, up to 72 car brands about 220 car models from European, USA Asian, Australian, Indian and Malaysia Car Models. Multi-Languages: English, German, Japanese, Russian, French, Korea, Arabic, Spanish, Italian, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Persian, Romanian, Serbian, Finnish, Swedish and Czech.
Remote Diagnosis: LAUNCH technician can provide remote help when you got problem during testing. Health Report Generate and Share. Diagnostic Feedback: Support to feedback your diagnostic problems to LAUNCH for analysis troubleshooting. More Convenient: Global Version, No IP and language limitation. Brand PAD: 8'' inch capacitive touchscreen Lenovo PAD, fast running speed.
Communication: Support Wifi and Bluetooth. Special Design: X431 V Pad computer equipped with an exclusive X-431 V protection sleeve to prevent it from being damaged. Entertainment-savvy Tablet : Built-in Wi-Fi module makes surfing on the internet freely. Android based applications can be customized to install or uninstall.4-Core Faster Chip & 1.4 Ghz processor & Extendable 128Gb TF card. Quad-core processor take the faster analyze. Customized Level Lenovo Tablet & 4850 amh battery. The LAUNCH X431 V PRO was make with the Lenovo Tablet, it comes with 8 inch Larger Color LCD color touch pad. You can use it to do a smooth job on car or daily use.
5.0 MP Pixel Rear Camera, Wifi/Bluetooth, Android 7.1 systems. Ect 9 Hours No-Stop Using Time - Launch x431 v pro comes with 4850mah battery, support up to 9 hours using time. English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional.
Full System Diagnosis+Bi-Directional Control +Active Test + Adaptation+ Matching+ Reset + Initialization+Coding +Remote Diagnosis. Requests a module to perform a specific test and function. (Turn on and off actuators to determine whether there are problems with sensors and actuators).
This function usually used on DASHBOARD SYSTEM(When the light on, but you can not turn it off after clear codes). Re-flash the vehicle control modules? Reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.
Match the synchronous replacement module/components with the automobile computer data. For Air Suspension Matching / Seat Matching / Head light Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset and more, cover all system.
With instant messaging technology, you can contact LAUNCH engineers for real-time online help. You can even have your repairman use this function to help you diagnose, even if one of you is in the United States and one is in Canada, no matter how far. Ing of the x431 program, the functions of the launch x431 v pro will add more. Head light Fitting, Seat Matching, Door and Window Initialization Study, Sunroof Initialization, Air Suspension Matching, Gearbox Matching, Injector Calibration, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change Reset, (depending on the specific car models, not for all cars). Powerful 30+ Special Service Reset Functions.
ECU Coding --- The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data. For certain components after making repairs or replacements. Oil Lamp Reset --- allows you to perform reset for a new calculation of Engine Oil life system once changed the oil. TPMS Reset --- makes TPMS sensor in displaying sensor IDs from the vehicle.
S ECU, inputting TPMS sensor replacement IDs. Key Programming --- read pin code from vehicle security immo system, mainly used to disable the lost vehicle keys and program. A new replacement key fob.Electronic Parking Brake Reset --- to deactivating and activate the brake control systems, assist with brake fluid control, open. And close brake pads, and set brakes after disc or pad replacement.
Steering Angle Calibration --- to perform calibration for the Steering Angle Sensor, and clear fault memory. Battery Register / Battery Maintenance --- allows the scan tool to evaluate the battery charge state, monitor the close-circuit. Current, register the battery replacement, and activate the rest state of the vehicle battery system. ABS Bleeding --- the auto bleed procedure is used on brake pump equipped vehicles. Electronic Throttle Position Reset / Learn --- Initialize the throttle actuators so that the "learned" values stored on ECU are.Diesel Particulate Filter (DPF) Regeneration --- specially works for Diesel Particulate Filter system with DPF regeneration, DPF. Component replacement teach-in and DPF teach-in after replacing the engine control unit. Gear Learning --- Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft.
Injector Coding --- Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement. Accompany with continuous update of Launch X431 software and program, More functions has been added : Head light Fitting. Seat Matching, Door and Window Initialization Study, Sunroof Initialization, Air Suspension Matching, Gearbox Matching, Injector.
Calibration, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change Reset, depending on the specific car models. And more and more function will be improved and optimized... LAUNCH X431 V PC Parameters. Mh, rechargeable polymer lithium battery.
Standby time:it is subject to the using environment. Generally it can keep working for 4 hours.
Extension memory card:128G Micro SD(TF) card supported. Touch screen:5 points capacitive touch screen.Working temperature:-10°C 55°C (14°F to 131°F). Storage temperature:-20°C 70°C (-4°F to 158°F).
Average working current: About 35mA. Working temperature: -20 to 55?Storage temperature: -30 to 70? LAUNCH X431 V Packing List. LAUNCH X431 V 8'' SCAN PAD, BLUETOOTH ADAPTER, TPU BOX. 14 Connectors : TOYOTA-17, HONDA-3, MAZDA-17, FORD-6+1, SSANG YONG-20, CHRYSLER-6, SUBARU-9, KIA-20, DAEWOO-12. GEELY-22, GMVAZ-12, DAEWOO-12, BMW-20, BENZ-38. 12 Cables : GAZ, OBDII-16 EXTEND CABLE, SSANG YONG-14, SUZUKI-3, AUDI-4, FIAT-3, MITSUBISHI HYUNDAI-12+16. OBD1 ADAPTOR, BENZ-14, NISSAN-14+16, DAIHUATSU-4, POWER CABLE CLIPS. Gift : Free TPMS Tool EL-50448.
Otherwise a Unpaid Item case will be opened to you. USA, UK, HongKong, Australia, Russian, Germany. 12 months free repair for the devices. If after 30 days, or the item has been used, we have the right to decline your claim.We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. We are authorized first class distributor of Launch, Thinkcar, Ediag and Kingbolen brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "ediag_official" and is located in this country: US.
This item can be shipped to United States.