Note:Launch VSP-600 is free gift for you! Helps technicians to check issues on unreachable area in a vehicle. With 6 levels light strength, technicians can easily adjust the brightness according to the environment.It will work with LAUNCH X-431 scanners or any Android device and streams live video on it. Technicians can view, record and save images and videos. 2023 NEWEST ALL-IN-ONE LAUNCH X431 IMMO ELITE PLUS KEY PROGRAMMING TOOL & DIAGNOSTIC SCAN TOOL - 2 YEARS FREE UPDATE. >>>Comprehensive IMMO Elite Plus Scanner: IMMO Programming + E. CU Coding + Full Systems Diagnostic + 39 Hot Services. Why Choose Launch IMMO Elite Plus Scanner? Launch X431 IMMO Elite Plus is the perfect solution for global users who demand affordable and powerful immo key programming tool, which combines advanced key programming, all systems diagnostics, and advanced services in one Android based 8.0 inch touchscreen tablet, provides you with superior special functions by a Android 10.0 OS, a 2.0GHz 4-core high-efficiency processor, a 4GB RAM+64GB ROM large memory, and a 12300mAh high-endurance battery.
Add/Delete Key Fobs, Key Relearn, Disable Lost Keys, EEPROM Read/Write, MCU Read/Write, IMMO Read/Write, Engine Read/Write, etc. Request information or command a actuator to perform specific tests, such as cycling the a/c clutch on/off, perform evap test and more tests to solve the specific repairing work. Read PIN; Key Generation, Key Learning, Remote Learning, Key Matching, IMMO E. CU Reset/Adaption, IMMO Data Backup/Restore, Unlock Used Radio, etc. Reset, which has the same reset functions as advanced scanners.
Read codes/live data/module info, Clear codes, freeze frame and more on ENG/ABS/AT/SAS/SRS/TPMS/EPB/IMMO/BMS/... CU Coding can rematch, relearn, recode the new E. CU, and unlock hidden function, forbid annoying features, customize OE-settings, etc. Use the latest software update function AutoAuth to provide diagnosis, active testing, etc. Making the diagnostics more sE.Applicable to FCA vehicles equipped with a sE. CUrity gateway module (SGW) in 2017 and later.
[X-PROG 3 Key Programming Tool(Valued 800)]. Compatible with X-PROG 3 enables reading and writing EEPROM, generating special keys, anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading, new/used module replacement and.
CU Module Clone for more than 5000+ car models. It provides guided functions with step-by-step instructions for Key Learning, Remote Control Learning, and Remote Control Add, etc. [2 Years Free Update(Valued 700)]. Provides 2 Years free update, One-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance. >>>Provide Bidirectional Capability of Testing Components & OE-Level Diagnosis of All Systems.
Systems Diagnose - Read/Clear Codes, Live Data Stream, Module Infomation, Freeze Frame, etc. LAUNCH X431 IMMO Elite Plus automotive scanner can scan 120+ modules like ECM(engine), TCM(Transmission), ABS, SRS, Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset) and so on to perform OE level diagnostics to read and clear codes, view live data stream, and retrieve E. CU information, matching & adaptations, E.CU Coding, allows you to get a faster and more accurate test result on all electronic systems. Bi-directional Control - Diagnose the Real Cause of the Troubles.
LAUNCH X431 IMMO Elite Plus automotive scanner can perform Bi-directional Control over various car systems and components to determine the integrity of a system or parts like ABS, SRS, window, door, roof, by reading the E. CU data, or by monitoring the operation of the actuators. Turn on the radiator fan.
Turn on/off the cooling fan. Turn on/off the sound horn.
AFFORDABLE PROFESSIONAL KEY PROGRAMMING TOOL & ADVANCED IMMO FUNCTION SCANNER. >>>Work With X-PROG 3 For Further Extended Programming Capacibility.Read PIN/CS(All Key Lost); 2. Key & Remote Learning; 4. ECM MCU Reflash & Clone; 8. Cloning in BENCH Mode without Diassembly.. Add/Delete/Disable a Key Fob; 2.
Program a blank key fob; 4. Car key slot-Place the car key to perform the key matching function; 2.DB26-Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc; 3. Mercedes-Benz key infrared slot-Place the Mercedes-Benz infrared key to perform the key matching function; 4. Car key chip hole-Place the key chip to perform key matching; 5. DIY slot-Connect the anti-theft E. CU pin through the cable to read and write data; 7.
Locker Install chip burning socket-Complete EEPROM or MCU data read and write operations; 8. DC12V power supply-Connect DC12 power supply; 9.X431 IMMO Elite Plus Work with XPROG 3. Boot Mode Read Engine; 4.
Read & Write Key Chip; 6. Read & Write EEPROM; 8. Read BMW Engine ISN Code; 11.
Read & Write Mercedes Benz Infrared Keys; 17. MQB Gearbox Replacement for VW & Audi; 19. BMW E Chassis 8HP Gearbox E. CU CODING Customize Your Car Easily! Every automobile actuator has a record code in E.
CU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 IMMO ELITE PLUS is equipped with advanced E. CU coding function for addressing the following issues.
After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators. CU coding enables multiple car systems to recognize each other and then the actuators can start to work. Unlock hidden features, deactivate annoying features. Variant coding is programming E. CUs to meet vehicle variants, such as left-hand drive or right-hand drive.There are tons of E. CU CODING functions you need, such as. Start & Stop button coding 6. Remote window control unlocking 7. Air conditioning setting memory 10.
Ambient lighting brightness, And More.... CU Coding is not universally compatible with all vehicles! Please provide us VIN number/year/model via. Brake Reset : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered. SAS Reset: Learn to correct the angle and solve the problem of the steering angle of the steering wheel. Battery Matching: Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery. ABS Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline.
In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid. SUS Reset : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle's E. CU, reset tire pressure and turn off the tire pressure MIL.
GEAR Reset: The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary. Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
AFS Reset: It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body. Throttle Adaptation: Initialize the throttle actuators so that the "learned" values stored on E. AC System Relearn, Headlamp, AdBlue Reset, Air Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, Gearbox Relearn, HV Battery Diagnostics, IMMO Programming, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset, Transport Mode, Windows Calibration, Clutch Matching, Turbocharging Matching, Gateway Module Data Calibration, E. CU Reset, Rainfall Light Sensor, More Features Keep Growing..
Support the full-model system-wide diagnosis of basic functions all 10 modes of standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests, I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test for global 110+ brands. And Code lookup tool and acronym database to assist and speed diagnosis and repair time.
LAUNCH X431 IMMO ELITE PLUS is an anti-theft matching tool, support the ECM and TCM module's clone and support module main supplier BOSCH, Continental and/or Siemens, DELCO, ZF, GETRAG and Temic etc. The advantages of anti-theft module replacement and anti-theft module cloning for sperate brand are listed as follows. Volkswagen Audi IV and V key matching; 2. The fourth generation of Volkswagen instruments are completely lost (partially); 3. The fourth generation of Volkswagen free account is lost (part); 4.Audi 5th generation steering column chip reading and writing; 5. Reads the fourth generation MED17/EDC17; 6. Replacement of Volkswagen Audi MQB engine, wave box and steering column; 7. Volkswagen Audi 5th generation and MQB transmission FLASH and EEPROM reading and writing; 8. Volkswagen Audi BOSCH engine clone; 9.
Volkswagen Audi Siemens engine clone; 10. The function of adding and losing all the keys of the fourth generation instrument of Volkswagen Online; 11.MQB key increase and key loss function of Volkswagen online fourth-generation instrument; 12. The fourth generation of Volkswagen instrument (5ND920873B) lost all its keys and replaced the instrument; 13. The UDS engine replacement function after 2014, the fourth generation instrument+the fifth generation Bosch engine (the original vehicle engine is not required). Benz key matching (FBS3); 2. Benz engine, wave box brush empty (FBS3); 3. Benz gear shift computer is empty (FBS3 and before); 4. Benz engine clone (FBS4); 5. Benz Wave Box Clone (FBS4); 6. Benz key added calculation password (FBS3); 7.
Benz lost all keys calculation password (FBS3); 8. BMW (CAS1, CAS2, CAS3, CAS4, FEM/BDC); 2. BMW engine ISN code reading; 3. BMW E chassis 8HP wave box is empty; 4. BMW E chassis 8HP wave box clone; 5.
BMW F chassis 6HP wave box brush empty/clone; 6. BMW F/G chassis 8HP wave box clone; 7.
BMW F/G chassis 8HP wave box is empty; 8. BMW BOSCH engine clone; 10. Porsche front-end and back-end computer cloning; 3. Porsche Siemens engine computer clone; 4. US Ford anti-theft initialization; 2.
US GM Module (anti-theft) cloning; 3. Most models of Peugeot Citroen are read by the engine E. Volvo Link BCM anti-theft and password reading; 5. China Ford anti-theft module programming; 12.
China Ford anti-theft module anti-theft initialization; 13. China GM Programming, configuration, setting and deletion; 14.Programming, setting and setting of Roewe anti-theft system; 15. Programming, setting and setting of MG anti-theft system; 16. Second-hand new Yinglang, new Kaiyue and other anti-theft passwords 17.
Great Wall Motors PIN reading and anti-theft matching; 18. Dongfeng Fengshen reading PIN and anti-theft matching; 19. Dongfeng Fengxing PIN reading and anti-theft matching; 20.Geely Car PIN reading and anti-theft matching; 21 FAW car PIN reading and anti-theft matching; 22. Zhengzhou Nissan PIN reading and anti-theft matching; More Features Keep Growing. >>>Key Programming Tool with Everything, Which Exactly Entire Automotive Shop Needs.
[Remote Diagnosis Support] Remote diagnosis can realize real-time communication between equipment and equipment or between equipment and computer, complete vehicle remote diagnosis, and make it a reality for repair technicians to diagnose vehicles thousands of miles away. [Online Diagnostic Advice] LAUNCH engineers will help you troubleshoot problems. Customized exclusive beta version software for your car in this function.
[AutoVIN Scan] This option allows an automatic VIN detection when Launch IMMO Elite Plus Scan Tool is connected to the vehicle's DLC successfully, it can identify car brand, model, and year info to shorten the navigation processee, no longer waste time to manually inputting VIN code. [Diagnostic Record&Playback] Launch X431 IMMO Elite Plus Key Programming car diagnostic scanner records the every details of diagnostic session, provides a quick access to the vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime. [Guided IMMO Steps] It provides guided functions with step-by-step instructions for Key Learning, Remote Control Learning, and Remote Control Add, etc.
[8 in 1 Live Data Stream] There are 3 ways to view the data, you can choose the one that suits you best. Value-it is the default mode that displays the parameters in texts and shows them in list format. Graph-displays the parameters in waveform graphs. Combine-this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors.(Combine up to 8 options)You can also record the data stream and playback the data. [Diagnostic Report & Feedback] Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox. You can download it, and then print it to share it with others.
[Rear 8MP Camera] IMMO Plus provides rear 8MP camera, which is more convenient for car owners record cars info and diagnose data. [Settings] Settings menu can set some normal options, such as brightness of screen, turn of/off device key sound, connect network (it was needed when perform most functions), etc. [Firmware Fix] If the product encounters technical problems, such as the device prompt code error, the device suddenly cannot automatically read the VIN code, the device recognizes the vehicle model or year wrong, etc, you can try the firmware repair first, it can usually be solved. [Multiple Languages] Supports 25+ menu language.
Just send the Serial Number to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc. [Extension Module] You can perform more comprehensive vehicle inspections with LAUNCH IMMO Elite Plus, X431 BST360 Bluetooth Battery Tester(Charging Health Test/Battery Health Test/Start System Test), Videoscope(Examine unseen parts of engine, such as spark plug holes, engine-cylinder, small parts), X431 PRinter(Print out diagnostics data/Reports), And more. Otherwise an Unpaid Item case will be opened to you.We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse. 12 months free repair for the devices. 3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim.
We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands.And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.