LAUNCH Creader Elite for Mercedes Benz Full System Diagnostic Tool as X431 V PRO

  
LAUNCH Creader Elite for Mercedes Benz Full System Diagnostic Tool as X431 V PRO. 2023 NEWEST ALL IN ONE LAUNCH CAR DIAGNOSTIC SCAN TOOL FOR MERCEDES BENZ/MAYBACH, lifetime free update!! All In One, Meet your Need! LAUNCH Creader Elite Mercedes Benz is a professional automotive diagnostic tool for Mercedes benz, Maybach. It is equipped with launch x431 chip, does not only include basic functions, but also is capable of OE-LEVEL functions, ecu offline coding, adaptation, modification.

This benz car scan tool provides powerful full system diagnosis, full special functions and OBDII module support. It is the most cost-effective professional codes reader for benz owners. Reads and clears diagnostic trouble codes and resets MIL of all systems. Full free reset functions and full bi-directional control.

Warm Tips: get full special functions on the diagnose menu. Select diagnose menu> your car model>manually select>select system> special function.

Full OBDII functions for all car brands. Read Fault Codes, Erase Fault Codes, Read Datastream, I/M readiness, Vehicle Information, EVAP test. Ecu offline coding+Relearn + Calibration + Adaptation. Matching + Initialization + Remote Diagnosis.

Auto vin(this funtion varies on the car model and the year). Shows live sensors data and provides data graphing. 4 in 1 PID graphs for easy and intuitive diagnosis. Ergonomic design and ruggedly built for both shop and road tests.

Upgraded hardware:All in one auto diagnostic and maintenance solution. Designed with Android 5.0,4inch, 480800P touch screen, supports.

Launch Creader Elite Benz diagnostic scanner supports 24 Hours Guest Service, 60 Days No-Reason-asked Return. And 5 years quality wa-rranty. LAUNCH CRE BENZ scan tool equipped with launch x431 chip, that support oe-level functions, like ecu offine coding, module calibrate. All in one car diagnostic tool is waiting for you!

For separation and intake valves in component A7/3 (Traction system hydraulic unit)/component A7/3(Traction system hydraulic unit)/component Acceleration sensor/component B24/15(Yaw rate sensor for lateral and longitudinal acceleration)/component B37/1 (Pedal angle sensor)/component Acceleration sensor/component ESP(R) control valves/component Electric parking brake/component Acceleration sensor/component B24/15(Yaw rate sensor for lateral and longitudinal acceleration)/component Yaw rate sensor for lateral and longitudinal acceleration/reversing camera and more. So when you press down the accelerator pedal/brake pedal, your car won't automatically start/stop. Make the moving pointer move, perform self check, and then return to the initial point at the time the ignition is turned on. The fuel gauge can show the real-time filling quantity of fuel in the tank.

/ The car lock sound effect will be available at the time the car is locked. /Your turn signals & rear fog lights can be alternatively flashing. Use the key fob to make all car windows automatically closed with just one press of the lock button.

Keep the daytime driving lights lighted on for 20 seconds. /When you press the brake pedal, your stoplights can be all lighted up.

Customize and Upgrade Vehicle in Your Own Way. Reprogram adaptive data for vehicle control modules after repairs or replacements.

Access to ALL vehicle systems and subsystems, to perform a comprehensive scanning on ECUs. Intelligent Full Systems Diagnostics for your Mercedes. LAUNCH CRE BENZ automotive diagnostic tool can.

Like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset), Radio, EPB and so on to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information, allows you to get a faster and more accurate test result on all electronic systems. It can access to the depth of every onboard systems to read and analysis the DTCs. It can clear the DTCs hidden in the ECU and clear the lights on the dashboard. Get ECU information in detail.

A valuable reference to determine the specific problems accurately. Active Test / Bidirectional Control. Supports bi-directional or active tests on systems and sub-systems, components and so on.

For example, it can do bi-directional on ABS to test its sensitivity and function, on Motor Pump to test the integrity of the system, on fuel pumps, wipers, headlamps, windows, doors, sunroof and so on to test its functionality. Component M16/57 (Exhaust flap controller)/Component M16/6 (Throttle valve actuator)/Component M55 (Intake port shutoff actuator motor)/Component Y27/7 (Exhaust gas recirculation actuator, low pressure)/Component Y27/8 (Exhaust gas recirculation actuator, high pressure)/the recirculated air flap stop/the throttle valve stop and more.

For obstruction protection/Acceleration of sensor rotor/shift forks/transmission/wet start-up clutch (NAK)/values of shift operations and more. Get Full Special Functions under Diagnose menu! LAUNCH Elite Mercedes benz Scanner supports All Special Functions without any charge in lifetime, and continuously growing.

The way to execute special function is go to "Diagnose" menu, rather than "Reset" menu. If you enter the "Diagnose"> Automatically Search> Special Function. DON'T option the "Reset" menu. Perform reset for a new calculation of Engine Oil Life system once changed the oil.

After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light. Clear the fault information of low battery and make it match again. SAS Steering Angel Sensor Reset. Reset the steering angle to zero to keep the car running straight. When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline.

In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid. Write the new injector code into the car system for correct cylinder injection quantity.

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors. Initialize the throttle actuators to the default state. It can detects the ambient light and then decides whether to turn on the headlights automatically.

It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body. The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary. The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

Adjust the vehicle body height sensor for level calibration. Help complete the gearbox self-learning to improve gear shifting quality. Monitors certain camshaft position sensors signals. Set the size parameters of the modified or replaced tire. Set or learn Air/Fuel ratio parameters.

Adblue Reset(Diesel Engine Exhaust Gas Filter). Reset urea after the diesel exhaust treatment fluid is replaced or filled up. Activate the electronic water pump.

Reset catalytic converter learned value stored in ECU. Set up the automatic start-stop function in ECU 22. Calibrate the memory in replaced or repaired seats.

Perform door window matching to recover ECU initial memory. Log remote control key on/off 47.

MFL and air conditioning 48. All functions are depending on the specific car models, not for all cars. Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information and prevent the related control mod.

There are 3 ways to view the data, you can choose the one that suits you best. Value-it is the default mode that displays the parameters in texts and shows them in list format. Graph-displays the parameters in waveform graphs.

Combine-this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 4 options)You can also record the data stream and playback the data.

Health Report Share & Print. This car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime. Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox.

You can download it, and then print it to share it with others. After enabling the option of the screenshot function, you can take a screenshot of the data or interface you want at any time during the use of the product. LAUNCH TECH's engineers will help you troubleshoot problems.

Customized exclusive beta version software for your car can be obtained here. English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese Traditional, Polski. If you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier. Incorporates Smart AutoVIN technology for quick and accurate vehicle identification without having to manually select vehicle parameters.

This technology is ideally suited for life around busy garages or on the road with mobile technicians. You will enjoy quick and effortless software update procedures for new upcoming features. Other scnner only support 1 year free update.

Launch creader elite benz car code reader also provides the same professional-level diagnostic functions for BMW, vw and other car brands. You can get more car brands on the "mall".

Full OBDII Test Modes for all car brands. Present some diagnostic trouble codes after scanning the vehicle.

Clear the fault codes after doing the repair according to the prompt of the scanner. Show the information of continuous data stream from a vehicle in live graphic (waveform) display. Besides reading ecu info, reading/clearing fault codes, LAUNCH CRP129E obd2 scanner is also equipped with an individual menu for live data stream, which will show you transmission temperature, cylinder pressure, common rail pressure, etc. Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.

Note:If the vehicle uses a controller area network (CAN) protocol to communicate, this function is not supported by vehicle. Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Certain vehicle components can be actuated by commands sent from the scanner to test their operability. Otherwise a Unpaid Item case will be opened to you. USA, UK, HongKong, Australia, Russian, Germany. 12 months free repair for the devices. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years.

We are authorized first class distributor of Launch, Thinkcar, Ediag and Kingbolen brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.