2023 LAUNCH X431 V+ HDIII HD3 PRO 5 Heavy Duty Truck OBD Diagnostic Scanner Tool

  
2023 LAUNCH X431 V+ HDIII HD3 PRO 5 Heavy Duty Truck OBD Diagnostic Scanner Tool. EL50448 TPMS Reset Relearn Tool Auto Tire Pressure Monitor Sensor1. 2023 Global Version LAUNCH X431 V+ PRO 4.0 OVER 2000000 CAR REPAIR SHOPS & MECHANICS's First Choice. As the latest Elite version after X431 PROS V 4.0 upgrade. It adds a more convenient camera scanning function, providing you with the most advanced diagnostic and coding/brush hiding technology for 12V cars and 24V trucks. It also features advanced OE-Level IMMO functions, ADAS calibration, TPMS functions, battery testing, etc. Update your X431 V+ to V 7.00.012 to gain Topology Mapping function.

Note that Topology is not a universal function and compatibility with your vehicle's brand should be verified by checking the VIN before purchasing. CU Replacement+Online Coding +Setting & Changeover +Modification +Offline Coding + Customization + Personalization + Windows Calibration + Seats Calibration + Tyre reset + Language Change + A/F Reset + Coolant B leed + Transport Mode + Adblue Reset + NOx Sensor Reset NOx + Stop/Start Reset, Newly Updates: Added functions on Passenger Car Software of LAUNCH X431 V+ diagnostic scanner. High Voltage Battery Health Test.

Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls. Match, learn, or code the newly replaced E. CU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements. CUs to meet vehicle variants, such as left-hand drive or right-hand drive. Variant coding includes the enabling and disabling of software-driven functions. For 2017 and later FCA Vehicles with SE. Register with AutoAuth to enable your LAUNCH V+ pro tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable. CU/module is damaged, you have to replace it with a new one. Otherwise, the car cannot start or some parts cannot work normally.

CU/Module replacement functions, launch scanner X431 V+ 4.0 can help you initialize, match, relearn, or code the newly replaced E. CU/module to get it back on track. Make full use of hidden features or disable car's annoying functions. 3-Time Flasher Setting, Auto L ock/Unl ock Function, one-touch signal flickers, deactivate some buzzing sounds, needle sweep, rear-view mirror folding, disable daytime running light, disable seat belt alarm beep, remove maximim speed limiter, etc. A udi /VW firmware protection cancel features.

One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Compatible with X431 HDIII 24V Heavy Duty Truck. Module for diagnosing light, medium and heavy duty vehicles.

Wireless & intelligent Diagnosis + Full Systems Diagnoses. More than 35 FREE RESET FUNCTIONS. Fix 99% car-related maintenance issue. NEW ADDED MAINTENANCE FUNCTIONS: GPF Regeneration, High Voltage Battery Health Test. More than 150 Brands and 10000+ Cars supported + 25 Languages + 2 Years Free Update. Online Maintenance Resources: Operating skills, DTC Help, Automotive Technology handbook, Repair Case and How-to Videos. Branded Tablet with 5.0 MP Pixel Rear Camera. 10.1-inch HD Touch Screen: A brighter, clearer Screen let you "Deep Dive into Diagnostics". Andriod 9.0 System, give you smooth operation, Anti-Slip & Anti-Grease protective sleeve design. Brilliant Battery Life: 7000mAh rechargeable battery (up to 10 Hours NON-STOP Using Time+ Long Stand-by Time).

64GB memory (supports extended to 128GB): save more vehicle documents & customer data. Multi-PID Live Data Graphing IN 1 Screen: One screen can display 12 data stream (Graphic and textual), which is easy to navigate. 2.4GHz&5GHz Dual-Frequency Wi-Fi, 4X faster transmission rate. CPU Processor Updated from 1.4GHz to 2.0 GHz quard-core, greatly increased the speed of running multiple task.

ALL-IN-ONE LAUNCH X431 V+ & HDIII Truck & Car Diagnostic Tool for 12V Cars and 24V Heavy-Duty Trucks. LAUNCH X431 V+ & HDIII is LAUNCH's new truck diagnostic tool, which can perform professional diagnosis, repairs, and maintenance on commercial vehicles Heavy-Duty Trucks, Buses, Excavators, Tractors, RVs, etc. And passenger vehicles Sedans, SUVs, MPVs, pickups, etc. It's compatible with 12V & 24V electronic control systems, covering 100+ commercial vehicle electronic control systems worldwide, such as Bosch, Yuchai, Shangchai, Xichai, DETROIT, ALLISON, Renault, Mercedes-Benz Truck, Yunnei, Sinotruk, etc. And most have reached the OE level.

Also, it supports the diagnosis of Euro III to Euro VI standard vehicles. Launch X431 V+ & HDIII Scanner --- Much More Powerful. This Launch high-end truck scanner X431 V+ & HDIII comes with an unmatched wide range of vehicle coverage, extraordinarily powerful functions, all models and system diagnostics, accurate diagnostic data, and fast diagnostics & updates, making it much more powerful than other truck scanners.

Highly Recommended by PTEN (Professional Tool & Equipment News) Magazine. Based on its years of strong R&D and accumulated diagnostic data & cases, LAUNCH products have won the great favor of person around the world and have been highly recommended by PTEN magazine.

Meantime, there are hundreds of thousands of celebrities recommending our products on YouTube and we have over one million users so far. OEM-Level 2023 LAUNCH X431 V+ PRO 4.0 Elite, Classic LAUNCH X431 Diagnostic Scanner, No IP Limit, 2 Years Free Update. ECU Coding - Help the newly replaced ECU/module to work properly.

Why does the car not work properly after replacing the ECU/module? When the ECU/module is damaged, replacing it with a new ECU/module is necessary. Otherwise, the car could not start, or some parts will not work. Launch scanner X431 V+ 4.0 can help you do that. LAUNCH X431 V+ PRO 4.0 Support Advanced ECU Coding Functions (Online Coding, Offline Coding, Flash Hide Functions).

Code Adaptive Data: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 V+ escaner automotriz professional has the ECU coding function to recognize new actuators after you change the fault actuators or parts. Recognize Replaced Modules: ECU coding enables multiple car systems to recognize each other and then the actuators can start to work. Flash Hidden Functions: This feature is used to activate hidden features that most car manufacturers include that are not available to the average car owner. Examples include corrective consumption calculation, seat belt warning, auto start/stop, hidden menus, daytime running lights, cruise control, automatic locking and unlocking of the central locking, comfort windshield washer, welcome lights, etc.

To enable most of these functions, it is enough to activate them (in the car's "brain"), while for some others it is necessary to install additional missing modules in the car. The new Ford Focus can be upgraded to a tire pressure monitoring function by flushing the ECU. This feature is especially important for those who like to drive long distances, significantly improving the safety of the car. Mercedes-Benz E-Series can change the much-criticized air conditioning mode by brushing the ECU to improve passenger comfort.

VW Passat can be swiped to "modify home/leave time", "selective door locking and other functions". It is important to note that, due to hardware and other reasons, such as the Audi Q5, if you want to brush the "home/away function", you must have the automatic headlights function. Online Coding: BMW, VW, Audi, Skoda, SEAT, Porsche, etc.

Offline Programming (Variant Coding): BENZ, Ford, Mazda, Vauxhall, Opel, etc. Flash Hidden Functions: Benz, BMW, VW, Audi, Skoda, SEAT, Porsche, Jeep, Dodge, Chrysler, Toyota, Honda, etc. PROFESSIONAL TOOLS CAN PLAY A HIGHER VALUE IN THE HANDS OF MORE PROFESSIONAL MAINTENANCE PERSONNEL. Introducing the revolutionary function of topology mapping in automotive diagnostic products!

Say goodbye to guesswork and hello to precision with our advanced technology that allows you to easily identify and locate faults in your vehicle's electrical system. Our cutting-edge diagnostic tools provide a comprehensive view of your vehicle's electrical system, giving you a detailed map of all the components and their connections. This allows you to quickly pinpoint any faults and troubleshoot with ease. Whether you're a professional mechanic or a DIY enthusiast, our topology mapping feature is a game-changer that will take your diagnostic capabilities to the next level. Don't settle for outdated diagnostic tools that leave you guessing.

Upgrade to our topology mapping technology and experience the future of automotive diagnostics today. With our products, you'll have the power to diagnose and fix problems with confidence, ensuring your vehicle runs smoothly and efficiently.

Try it now and see the difference for yourself! ALL-IN ONE, Faster, Better Than LAUNCH X431 PROS MINI/PROS V1.0. 2023 OE-LEVEL Improved Functions, Makes LAUNCH X431 V+ PRO 4.0 Elite Tool More Advanced. Compatible with Ford, Mazda, Vauxhall, Opel, etc.

Variant coding is programming ECUs to meet vehicle variants, such as left-hand drive or right-hand drive. Some states/countries require the automatic activation of the headlights while driving, which results in another vehicle variant. Compatible with Volkswagen / Audi / Skoda / Seat etc. Having the boot function means that you have an expert who is ideal for your repairs.

It frees you from the hassle of finding automatic channel numbers and login codes. It consists of a detailed operating guide and operating instructions. For different car models, the X431 V+ scanner will provide you with specific instructions on auto-login, matching, setup and coding.

Disable lost keys to prevent the car from being stolen, add new keys, and match replaced IMMO module. For more advanced IMMO programming functions, X431 V+ can use with PROG 3 key programmer. Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc. This function matches and synchronizes the components with each module after you replace the module, such as Gearbox Matching / Air Suspension Matching / Seat Matching / Headlight Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset...

Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can't be avoided. LAUNCH X431 V+ 4.0 escaner para autos support PMI function, Compatible with Ford /Lincoin/ Mazda etc. Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire.

Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem. Audi /VW firmware protection cancel features. Cylinder Balance test/Cylinder leakage test/Cylinder Pressure variations/Relative Compression Test. OEM-Level 2023 LAUNCH X431 V+ PRO 4.0, Classic LAUNCH X431 Automotive Scanner Diagnostic Tool.

35+ Mechanics Frequently USED Service Functions: Cover almost all available Reset Functions on Vehicle. LAUNCH X431 V+ 4.0 escaner automotriz professional can perform a wide range of actions as well as a number of special functions that make it an even more astonishing piece of equipment. These special functions include but are not limited to. Reset the oil life systems every time the oil and oil filter are changed.

Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed. Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc. SAS Steering Angel Sensor Reset. Perform steering angle sensor calibration and clear records. Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. Tire pressure resetting is required to be performed after maintenance is performed. Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

(K ey Programming) - Disable any lost keys and add new keys. Please note: This function only work for some cars with easy system. You can send the year, model to us to check compatibility. WARM NOTICE: LAUNCH X431 V+ 4.0 2023 scan tool may not work IMMO program function for some cars. Initialize the adaptive headlamp system.

The sunroof needs to be reset when the sunroof control unit have communication problem or changed. Adjust the vehicle body height sensor for level calibration. Adblue Reset(Diesel Engine Exhaust Gas Filter); 19. High Voltage Battery Diagnostics; 28. Interactive Vehicle Dynamics (IVD) Initialization Sequence; 31.

Halt/Resume Transmission Adaptive Learning; 32. Passive Anti Theft System(PATS)Functions; 33. Initialisation Of Automatic Tailgate; 35. Initialise Power Window Regulators; 36. Normalise Slide/ Tilt Sunroof; etc.

(depending on the specific car models, not for all cars,). And more and more function will be improved and optimized. LAUNCH X431 V+ PRO 4.0 Bi-directional Scanner, 2023 Upgraded Version with OE-LEVEL Full System Diagnostics & 35+ Reset Services & ECU Online Coding.

Mechanics with 40 years of experience Highly Recommended: Bi-Directional Diagnostic Scan tool LAUNCH X431 V+ Elite 4.0. These two features are indispensable for accurately and precisely pinpointing problems with a vehicle: full system diagnostics and bi-directional control.

As a universal scan tool, the Launch scanner X431 V+ automotive obd2 scanner can diagnose all systems on 99% of vehicles on the road and does so to OE levels. Rather than using separate OE diagnostic tools, the Launch scanner X431 V+ 4.0 helps you increase efficiency and control costs. The systems include but are not limited to. PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Gear, and more. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more.

BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition. Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System, Communication and Information/Entertainment System. Bi-directional makes X431 V+ scanner automotriz more than a tool that receives information from the tool but also a tool that can send commands to control the component.

In this case, it is easier for mechanics to identify and troubleshoot problems without going under the cars. Some features for your reference.

Turn on/off the front and rear side ACM solenoid, Cycling the A/C, Clutch on and off, Left clutch electromagnetic coil test, Acceleration device test, Oil pressure control test, Vehicle level position calibration, Brake Vacuum Pump, Inlet, and Outlet Valve test, Open Brakes tests, Parking brake test. LAUNCH X431 V+ PRO 4.0 Bi-directional Scan Tool, 2023 Upgraded Version with OE-LEVEL Full System Diagnostics & 35+ Reset Services & ECU Online Coding.

Fiat Chrysler Automobiles (FCA) implemented a sE. CUre gateway module that was introduced on a selection of their 2018 and newer model vehicles. Access to diagnostic functions requires registration and authentication through AUTOAUTH for scan tools.

You can directly log AUTOAUTH account on X431 V+ 4.0 bidirectional scan tool and process diagnostics for FCA vehicles seamlessly. After completing the diagnostic, you can generate reports from the stored diagnostic data, which will help you further analyze faults and better manage your repair orders. You can share the report with others via e-m-ail and print it out. You can use Launch X431 V+ 4.0 escaner automotriz professional to view and capture real-time Live Data, get to know the current operating status for parameters, and provide insight into overall vehicle performance. There are three display modes available for data viewing: Graph, Value, and Combine.

And you can display 12 data streams at the same time, providing great convenience for comparing data. Extensive Vehicle Coverage - 10000+ Cars supported. Aisa: Compatible with Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi, Gonow, Qoros, Maxus, Mvm. Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR. USA: Compatible with Gm, USAFord, Chrysler, Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM.

Not Only a Diagnostic Tool, but Also an Comprehensive Inspection Tool. LAUNCH X431 HDIII: This function enables X431 V+ to do full comprehensive HD truck diagnostic functions for cars and trucks from 12V to 24V. LAUNCH X431 TSGUN: Perform all professional TPMS diagnostics and maintenance functions such as activating sensors, performing TPMS relearn, programming Launch Sensors, monitoring TPMS health status, etc. LAUNCH BST360 Battery Tester: Connecting with this battery tester, V+ is endowed with battery diagnostic features such as battery health test, start system test and charging health test, etc. Which help you to detect battery-related issues of vehicles accurately and timely.

LAUNCH VSP600 Videoscope: Make V+ a perfect tool for viewing and capturing video and still images of hard-to-reach areas. LAUNCH X431 PROG3: Achieve diagnostic functions such as vehicle k ey, Engine, and gearbox programming for various vehicles. X431 ADAS Moblie/ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems. LAUNCH X431 Wi-Fi Printer: V+ can be connected to WIFI printers to print out diagnostic data or reports. Note: If you want to get this extra modules, just reach us, we have all modules in stock. What Comes with LAUNCH X431 V+ 4.0 automotive obd2 scanner? X-431 V+ v4.0 host, QUICK START GUIDE, USER MANUAL, PIN envelope, Storage Case, CLIPPER, FUSE, BT ADAPTER (DBScar-4/DS301), SWITCHING ADAPTER, OBD 1 Adapter BOX, AIT I OBD16 Extension Cable, X-431 PRO5 USB A to Micro cable, Cigarette Lighter Line, Power Cable with Double Clamp.

24 special connectors for diagnosing different cars directly: AUDI-4, BENZ-14, BENZ-38, BMW-20, CHRYSLER-6, DAEWOO-12, DAIHATSU-4, FIAT-3, FORD-6+1, GAZ, GEELY-22, HONDA-3, KIA-20, MAZDA-17, MITSUBISHI/HYUNDAI-12+16, NISSAN-14+16, SSANGYONG-14, SSANGYONG-20, SUBARU-9, SUZUKI-3, TOYOTA-17, TOYOTA-22, UNIVERSAL-3, GM/VAZ-12. EL-50448 TPMS Activation Tool 1Set (in the package).

Choose your native language without encountering any sort of language barrier. 24 languages supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional. Thus, if you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier. Otherwise an Unpaid Item case will be opened to you. We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse. 12 months free repair for the devices. 3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands.

And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.