For repair shops to boost more businesses. IMMO PLUS LAUNCH scanner can read the immobilizer PIN and backup the key information for later reset/relearn. Include Read PIN; Key De-lete/Add/All Lost; Key Learning; Module Data Wiping; Module Replacement, IMMO E. Working with X431 PROG3 key programmer, LAUNCH X431 IMMO PLUS serves 99% of coverage and provides Engine/Gearbox E.CU Module Cloning & Replacement; Remote Matching; Key Generation; Key Learning; Read/Write Key EEPROM, MCU, Engine, Immobilizer; Backup & Restore Engine E. CU Clone for 5000+ models. Easily replace the new/used modules without complex & tedious operations. CU-related issues and allowing you to personalize your vehicle functions as preference need.
IMMO PLUS scanner not only configure comprehensive IMMO functions but also integrates common reset functions for a full range of diagnostics. IMMO PLUS scans all the vehicle control modules and finds out all the DTCs to help you to know what's wrong with the car. An essential feature for quickly locating vehicle problems and saving your time. Offer step-by-step instructions and guide technicians to do fast repairs. With the assistance of new communication standards, LAUNCH IMMO PLUS auto scanner enables much higher data rates & faster diagnostic speed than ever.Use the latest software update function AutoAuth to provide diagnosis, active testing, etc. Making the diagnostics more sE.
Applicable to FCA vehicles equipped with a sE. CUrity gateway module (SGW) in 2017 and later. X-PROG 3 Key Programming Tool (Valued 800). Compatible with X-PROG 3 enables reading and writing EEPROM, generating special keys, anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement. 2 Years Free Update(Valued 700).Provides 2 Years free update, One-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance. No IP limitation and offering FCA SGW vehicle access. >>>> NEW GENERATION OF 8-INCH KEY PROGRAMMING TOOL WITH HIGH CONFIGURATION & SUPER PERFORMANCE - 2 YEARS FREE UPDATE.
As a standard anti-theft feature, a car immobilizer system can dramatically minimize the likelihood of your automobile being stolen when it functions properly. This is where LAUNCH IMMO PLUS comes in. More situations could be solved by LAUNCH X431 IMMO PLUS.Add new keys for the used cars. CU data of the lost key.
Change the broken IMMO E. Reset the replaced IMMO E. This LAUNCH scan tool can scan the vehicle IMMO PIN code when all keys are lost.
Compatible with Peugeot Citroen, GM, Nissan, Hyundai, Kia, etc. LAUNCH IMMO PLUS empowers you to de-lete key information, add new keys, and handle all key lost. Read key data to E.CU module and reset/match the new key with IMMO E. Compatible with Ford, GM, Mercedes-Benz, BMW, VW/Au-di, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, etc. Clear key module information & data for matching new keys. Compatible with BMW, Mercedes-Benz, VW/Au-di, Honda, Nissan, Hyundai, Kia, etc. CU with vehicle after replacement or repair.
CU Clone for Engine & Gearbox. CU clone can solve problems that coding functions (programming, initialization, anti-theft matching) cannot solve during module replacement. Up to 5000+ vehicle models are available. This clone function can clone/backup original vehicle data to the new module and directly finish replacement & use.
Powerful Functions are Provided by Key Programming Tool with X431 PROG3 Key Programmer. Work With X-PROG 3 For Further Extended Programming Capacibility. In order to get a new key, an experienced lo-cksmith together with LAUNCH IMMO PLUS programming tool can offer programming services chips/remote key fobs/transponder to perfectly match the settings of your car. Especially working with the X-PROG3 Immobilizer & Key Programmer, LAUNCH IMMO PLUS enables key chip reading & matching, key generation, E. To be easily and effectively.
Advantages of PROG 3 Programmer Brings for LAUNCH IMMO Key Programming Tool. CU Module Clone & Replacement (for 5000+ Models). Remote Control Matching / Key Generation / Key Learning.Read/Write Key EEPROM, MCU, Engine, Immobilizer. Backup & Restore Bosch/Siemens Engine E.
VW & Au-di Key Learning/All Lost. CU Reading, Writing & Clone. BMW Key Adding/All Lost; E. BMW E chassis 8HP Gearbox E. Porsche Key Adding/All Lost; E.
Read BMW Engine INS Code. LAUNCH X431 IMMO PLUS diagnostic tool for all cars features advanced coding functions to meet personalized needs. CU coding is a process to code your vehicle modules and modify codes to activate many functions, which is widely applied to modern auto repair to solve module replacement, retrofitting, calibration, personalization, etc. LAUNCH X431 scanner provides an access to get more OEM codes for BMW, Benz (SCN coding), VW, Skoda, Seat, etc.
After replacing the vehicle components, LAUNCH automotive scanner can help quickly write adaptive code data into the replaced module/component to make it work properly with other vehicle modules. Have you ever been annoyed by the noisy seat belt chime when igniting the engine? Do you want to change your daytime running lights? Do you need to activate courtesy light?LAUNCH IMMO scan tool could make it come true by modifying the codes. More applications include deactivating the auto start-stop; customizing the color of interior lights; automatic mirror folding and unfolding; etc. This function allows you to install or change new modules to upgrade a vehicle such as Installing Fog Lights, Retrofitting Headlamps, etc. CU Coding is NOT universally compatible with all models. >>>> PERFORM 39+ COMMONLY-USED MAINTENANCE FUNCTIONS [CONTINUOUSLY GROWING WITH UPDATES]. LAUNCH X431 IMMO PLUS combines advanced IMMO functions and 39+ maintenance functions that every mechanic needs for daily repair. Oil Maintenance Reset: Reset the oil life system and turn off the oil light to start a new cycle. Brake Reset: You can use the LAUNCH X431 car scanner to reset the brake pad in the following cases: a the brake pad and brake pad sensor are replaced; b the brake pad indicator lamp is on; c the brake pad sensor circuit is in short-circuit; etc. Immobilizer Reset: Disable the lost keys and add new keys & remote control for vehicles with low-grade anti-theft systems. Steering Angle Reset: Reset the steering angle to zero to keep the car running straight. TPMS Reset Database: Relearn the tire pressure sensor ID with the vehicle after replacement. Battery Matching: Re-match the battery control module and motoring sensor. Air / Fuel Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up. NOX Sensor Reset: Reset catalytic converter learned value stored in E. AC System Relearn, Headlamp, AdBlue Reset, Air Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, Gearbox Relearn, HV Battery Diagnostics, IMMO Programming, Injector Coding, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset, Transport Mode, Windows Calibration, Clutch Matching, Turbocharging Matching, Gateway Module Data Calibration, E. CU Reset, Rainfall Light Sensor, etc. Note: More functions & model compatibility will be updated later. Explore more service functions by accessing menus of "Vehicle Brand -> System Diagnostics -> Special Function". You can message us to check compatibility first. >>>> PROVIDE THE BIDIRECTIONAL CAPABILITIES FOR TESTING COMPONENTS + OE-LEVEL ALL SYSTEM DIAGNOSES. LAUNCH IMMO PLUS diagnostic scan tool will give you in-depth access to all available systems including Engine, ABS, SRS, Transmission, TPMS, Body, Network, SAS, EPB, Chassis system, etc. This LAUNCH scanner works with fault codes, live data stream, active tests to fully assist vehicle problem-solving for a wide range of vehicle models. This LAUNCH scanner quickly scans all available systems and performs comprehensive diagnostics. CU information of unit type, version number, and other specifications. Read/Erase DTCs to pinpoint problems and clear trouble codes. View live data to react real-time status of vehicles and potential problems. Various active tests will be used to accurately figure out whether a specific system, component, or subsystem in certain parts goes well or not, without using the vehicle controls. The technicians don't need to disassemble the car into parts to detect the problem and minimize your diagnostic time. For example, if you get a shift solenoid-related code, you can access the AT module and test each shift solenoid to determine which one is faulty. Such tests may also include relay or switch, between two operating states. Available tests vary by vehicle.
Turn on the radiator fan. Turn on/off the sound horn. Turn on/off the cooling fan. Active tests vary by model.
You can check compatibility by messaging us. >>>> HIGH-END HARDWARE CONFIGURATION OFFERS SUPER PERFORMANCE. Operating System: Android 10.0. Memory: 4GB RAM & 64GB ROM.
Battery: 47880mWh(7.6V, 6300mAh). Display: 8.0 inch Touchscreen with 1280800 Resolution. Connectivity: 2.4GHz & 5.0GHz Dual WiFi.
X-PROG 3 Immobilizer Programmer Kit1. Type-A to Type-C USB Cable1.
Otherwise an Unpaid Item case will be opened to you. We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse.12 months free repair for the devices. 3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim.
We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.